Drifog 1.6 LPH Ultrasonic Humidifier Technical Specifications

Drifog 1.6 LPH Ultrasonic Humidifier💧 | Complete Technical Specifications, Features & Applications⚙️

In this article, we discuss the Idealin Drifog 1.6 LPH Ultrasonic Humidifier, covering its working principle, technical specifications, features, applications, and certifications.

🙏Welcome to insight control system blogger page.

Drifog 1.6 LPH Ultrasonic Humidifier

💧 Introduction to Drifog 1.6 LPH Ultrasonic Humidifier

Drifog humidifiers are designed to deliver ultra-fine mist humidification with high efficiency, low energy consumption, and zero surface wetting. These systems are widely used in industrial, commercial, and controlled indoor environments where precise humidity control is critical. ⚙️💧
The product is delivered with all required components, fittings, and accessories needed for proper installation and operation, without requiring additional parts to be purchased separately.

Drifog ultrasonic humidifiers are available in the following capacities:

Capacities

Drifog 1.6 LPH Humidifier
Drifog 3–6 LPH Humidifier
Drifog 12 LPH Humidifier
Drifog 15–24 LPH Humidifier

Components Included with Drifog 1.6 LPH Ultrasonic Humidifier:

Ultrasonic Transducer / Atomizer Assembly,
Water Tank / Reservoir,
Control Panel with Humidistat / RH Sensor,
Float Valve Assembly,
Water Inlet & Outlet Fittings,
Mounting Brackets & Hardware,
Power Cable & Electrical Wiring,
User Manual / Installation Guide,

APPLICATION

Drifog humidifiers are suitable for:

Application

Indoor Rooms,
Laboratories and R&D Chambers,
Textiles Industries,
Cold Storage & CA Rooms
Winery Cellars,
Greenhouses,
Mushroom Cultivation,
Cashew Processing Industries,

Technical Specifications for Drifog 1.6 LPH Humidifier

✔️Particle Size is < 2 Microns:

The humidifier produces ultra-fine water droplets smaller than 2 micrometers in diameter, which are almost invisible, evaporate quickly, and do not wet surfaces.

1 micron (µm) = 0.001 millimeter.

So, 2 microns = 0.002 mm, which is extremely small.

Smaller droplet size = higher evaporation efficiency

These particles are not visible to the naked eye,
Such fine particles can remain suspended in air for a long time.
Normal spray nozzle: 20–50 microns (visible wetting),

✔️Humidification distance > 11 feets

The mist or fog produced by the humidifier can travel more than 11 feet into the air before fully evaporating, ensuring effective humidification without wetting surfaces.
No water droplets fall or wet surfaces within this distance.
After 11 feet, the air is properly humidified, not damp.
Ensures dry operation (no condensation on machines, floors, or products),
Helps decide mounting height and nozzle placement,
Confirms suitability for high-ceiling industrial spaces like textile mills and warehouses.

✔️Power Consumption 120 Watts Only

The humidifier consumes 120 watts of electrical power during operation, indicating low energy usage and cost-effective performance.
It can run on a standard electrical supply without heavy load, Suitable for continuous operation with minimal impact on electricity cost.

✔️Area Coverage: 300 m³ (approx.)

The humidifier can effectively humidify an enclosed space with a total air volume of around 300 cubic meters, depending on room height, air movement, and required humidity level.

Area coverage depends on room length × width × height

Example: 10 m × 10 m × 3 m height = 300 m³

Actual coverage may vary based on:

Ceiling height,
Air movement / ventilation,
Ambient temperature,
Required humidity level (%RH),

✔️Fog Output: 1.5 – 2 Ltrs/Hr

The unit produces between 1.5 and 2 liters of fine mist per hour, indicating the amount of moisture added to the air for humidification.

Practical interpretation:

1.5 L/hr → lower fog / humidity output,
2 L/hr → maximum fog / humidity output,

At 2 L/hr, the system adds 2 liters of moisture into the air every hour.

✔️Power Supply: Single Phase, 220 VAC / 50 Hz

The unit operates on standard single-phase electrical power with a supply of 220 volts AC at 50 hertz, making it compatible with common industrial and domestic power systems.
Suitable for small to medium industrial and commercial installations.

✔️Water Connection: 0.5 Inches (0.1 ~ 0.5 MPa)

The unit requires a ½-inch water inlet connection and must be supplied with water pressure between 0.1 and 0.5 MPa for safe and proper operation.

Breakdown of the specification:

0.5 Inches

Refers to the pipe or hose size for the water inlet

Standard ½-inch plumbing connection, easy to install.

0.1 ~ 0.5 MPa (Water Pressure)

Minimum pressure: 0.1 MPa ≈ 1 bar
Maximum pressure: 0.5 MPa ≈ 5 bar

Ensures proper fog generation without leakage or damage.

Water supply pressure must be within this range:

Low pressure → insufficient fog output,
High pressure → risk of leaks or component failure,

✔️Noise Level: < 40 Decibels (dB)

The unit operates very quietly, producing sound levels below 40 dB, which is suitable for noise-sensitive environments without causing disturbance.

The humidifier produces sound lower than 40 dB during operation.

Quiet library: ~40 dB
Soft whisper: ~30 dB
Normal conversation: ~60 dB

✔️Dimensions

The physical size of the unit is 36 cm wide, 21 cm deep, and 55 cm high, which helps in planning installation space and mounting requirements.
Useful for checking clearance, wall mounting, or panel integration.
Ensures the equipment fits in the available space, Helps technicians and engineers plan layout and accessibility.

✔️Dry Weight: 6.5 kg only

The unit weighs 6.5 kilograms without water or operating fluids, indicating a lightweight design that is easy to handle, transport, and install.
Helps in selecting wall mounts, brackets, or supports and Safer for single-person handling in most cases.

✔️Water Supply Required: DM / RO Only

The humidifier must be operated using only purified DM or RO water, as using normal or hard water can cause scaling, nozzle blockage, and reduced performance.
DM (De-mineralised) Water: Minerals like calcium, magnesium, and salts are removed
RO (Reverse Osmosis) Water: Water is filtered through a membrane to remove dissolved salts and impurities and provides clean, low-TDS water suitable for fine fogging
Prevents white dust, stains, and deposits on equipment Protects nozzles, pumps, and internal components.
Improves system life and performance.

Note: Using raw or hard water may cause malfunction or damage and may void warranty.

FEATURES & EXPLANATIONS

⭐ 100% Atomization with zero water wastage:

The supplied water is completely converted into ultra-fine fog and fully evaporates into the air, with no dripping, runoff, or unused water loss.

⭐Adiabatic humidifier (Ultrasonic Principle):

The system increases air humidity by converting water into ultra-fine mist using ultrasonic vibrations, without adding heat, which causes natural cooling while humidifying the air.

⭐In-built float value system:

The humidifier has an internal float-controlled mechanism that automatically maintains the correct water level by allowing water in when the level is low and stopping the supply when the required level is reached.

⭐Zero Condensation:

The humidifier adds moisture to the air without forming water droplets on surfaces, ensuring no wetting, dripping, or moisture buildup on floors, walls, machines, or products.

⭐No compressed air / water pressure pumps required:

No compressed air / water pressure pumps required means that the humidifier operates independently without needing external compressed air systems or high-pressure water pumps to generate fog, simplifying installation and reducing energy and maintenance requirements.

⭐High gasification rate of upto 80%

It means that up to 80% of the supplied water is efficiently converted into vapor/fine mist and absorbed into the air, resulting in effective humidification with minimal losses.

⭐In-built overflow protection and water shortage protection:

the humidifier has internal safety mechanisms that automatically prevent water overflow and stop operation or alert the system when water supply is insufficient, protecting the unit from damage and ensuring safe, reliable operation.

⭐Hygienic Mist Output (Silver ion antibacterial technology):

The humidifier uses silver ions to inhibit the growth of bacteria and microbes in the water and mist, ensuring the fog released into the air is clean, safe, and hygienic.

⭐Portable yet durable:

The unit is easy to move and handle due to its compact and lightweight design, while still being strong, robust, and long-lasting for continuous industrial or commercial use.

Humidity Controller

⭐In-built RH sensor and humidistat

The humidifier has a built-in Relative Humidity (RH) sensor
It also includes an integrated Multispan cryo MHC 512 model humidity controller (humidistat), No external sensor or controller is required.

How it works:

In-built RH sensor and humidistat

The RH sensor continuously measures the actual room humidity (%), the humidistat compares this value with the set humidity level and system automatically turns ON or OFF to maintain the set RH.
Automatic humidity control without manual intervention Prevents over-humidification or under-humidification.

Example:

Set RH = 55%

If room RH drops to 50% → humidifier ON

If RH reaches 55% → humidifier OFF

In the upcoming articles, we will examine the Multispan Cryo MHC 512 model humidity controller’s technical details as well as its operational characteristics and settings.

Advantages:

Doesn’t need to drain or recycle water,
Doesn’t use any thermal energy or heating source to generate humidity,
For continuous water supply. Doesn’t need to be refilled again & again.
Does not wet the room like conventional humidifiers.
Not a single drop of water can be seen.
Doesn’t inflate your energy bills.
Achieves rh level much faster than conventional humidifiers,
Allows user to control and maintain between 30% to 90% RH,
All precautions are taken to protect the humidifier in abnormal situations,
Designed for human comfort as well,
Easy to install (just on 2 screws),
No maintenance required,
Plug and play device.

Approval & Certification

📝CE and ROHS certification for this product

The product meets European safety, health, and environmental standards:

CE: Indicates the humidifier complies with EU safety, health, and environmental protection requirements, and is safe to use in Europe.
RoHS: Confirms the product does not contain harmful substances like lead, mercury, or cadmium beyond allowed limits, making it environmentally friendly and safe.

Approval & Certification

📝Registered with SSI, FIFO, ITAMMA and EEFC

The company or product is officially recognized and registered with multiple industry and trade organizations, ensuring credibility and compliance with standards.

Here’s what each generally refers to:

SSI Registered as a small-scale or micro enterprise, which may provide tax or regulatory benefits.
Registered with FIEO means the company is officially registered with the Federation of Indian Export Organisations (FIEO).
ITAMMA (Indian Textile Accessories & Machinery Manufacturers Association) – Membership in a recognized trade association for textiles and machinery, adding industry credibility.
EEFC (Exporters’ Economic Foreign Currency account / or similar organization) – Registration with a trade/export-related body for international business compliance.

📝UL and CE approved motors are used

UL Approved – The motor is tested and certified for safety according to U.S. standards, ensuring reliable and safe operation.
CE Approved – The motor complies with European safety, health, and environmental regulations, making it safe to use in Europe.

All components are made from corrosion resistant and free materials,
Product approved by Government bodies, public firms and private institutions.

Abbreviations:

LPH - liters of water per hour,
Ltrs/Hr - liters per every hour,
RH - relativity humidity,
DM - De-mineralised,
RO - Reverse Osmosis,
CE - European Conformity,
RoHS - Restriction of Hazardous Substances
UL - Underwriters Laboratories
SSI - Small Scale Industries
FIEO - Federation of Indian Export Organisations

🎯Conclusion

The Drifog 1.6 LPH Ultrasonic Humidifier is a highly efficient, energy-saving, and hygienic solution for precise humidity control in industrial and controlled environments.💧
With ultra-fine mist generation, zero condensation, low noise, and advanced safety features, it ensures optimal performance without compromising comfort or equipment safety.📘
Its certifications, intelligent humidity control, and low maintenance design make it a reliable choice for laboratories, textiles, cold storage, and specialized applications.⚙️

📎 Related: Danfoss FC-102 LCP Simulator Tool

📎 Related: How Programmable Logic Controller Works